40m Add-On Dipole (pre-assembled) for PORTABEL Spiderbeam Yagis
DP4001R
Weight:
1.20
kg
Assembled Version
This version is pre-assembled and ready to install on a Portable Version of a Spiderbeam Yagi. (Balun not included.)
The 40m dipole extends the coverage of most Spiderbeam Yagi Antennas to include the 40m band.
It may be added on to
most existing Spiderbeam Yagi antennas, or ordered together with a new
antenna. The dipole is rotated 90 degrees to the other wire elements.
Both sides of the boom are extended by one additional fiberglass tube, increasing the turning radius from 5 meters (16 ft.) to 6 meters (19.2 ft.).
Each end of the dipole is capacity-loaded using two wires tied back to the side spreaders.
Both sides of the boom are extended by one additional fiberglass tube, increasing the turning radius from 5 meters (16 ft.) to 6 meters (19.2 ft.).
Each end of the dipole is capacity-loaded using two wires tied back to the side spreaders.
Content:
- 2 Fiberglas Stecksegmente (PORTABEL Yagi version / 35mm Durchmesser)
- Wireman CQ-532 Copperweld Wire
- Enamel-Insulated Copper Wire 1.5mm dia.
- Enamel-Insulated Copper Wire 1.5mm dia.
- Vorgefertigter Dipol bestehend aus:
2 Special Coil Forms- Heat-Shrink tubing with hot-melt-glue inside
- Polyethylene Insulators, black, UV-resistant
- M6 Tubular Solder Lugs, galvanized and tinned
- PVDF Monofil Line, 1mm diammeter (UV-resistant)
- Wire-Ties (UV-resistant)
- Plastic spool (20cm Diameter)
- 2 Fiberglas-Tube-segments (for portable YAGI)
- 2 Stainless Steel Hose-Clamps
- Flat Rubber Strip (UV-resistant)
- Schrumpfschlauch Ummantelungen
When using only one
balun, the forward gain and front-to-back ratio for the higher bands are
not affected, but the front-to-side ratio is reduced, especially on
15m.
Falls Sie eine optimierte Konfiguration mit 2 Baluns wünschen, muss dieser 2. (optionale) Balun separat bestellt werden.
NOTE: Not compatible with the WARC Spiderbeam Yagis.
Further informations under: Documents, Tips and Constuction Guides